NEXON

1.5L REVOTORQ ENGINE 120 9. Take out fuel filler assembly along with breather from body shell. INSPECTION Check if dust has blocked the 2 way cap, change cap if found defective. WARNING  A small amount of fuel may be released after fuel lines are disconnected. To avoid the chance of injury, cover the pipe to be disconnected with cotton cloth. Do not use cotton waste.. CAUTION  To avoid damage to vapour hoses while disconnecting, slide back the clamps then twist the lines as you pull. FITMENT For fitment follow reverse procedure for removal. D. FUEL TANK REMOVAL 1. Place the vehicle on a 2 poster lift. 2. Disconnect the electrical connections of the in- tank pump and the fuel lines. (For Removal Refer Tank Unit removal process). 3. Disconnect the fuel filler hose and the breather hose. 4. Support the fuel tank from below. 5. Remove the parking brake cable routed on the tank’s parking brake clamp. 6. Remove the four mounting bolts from tank and lower the tank carefully. INSPECTION  Check all hoses and pipes connected to fuel tank for leaks, loose connections, deterioration or damage. Replace if necessary.