NEXON

1.5L REVOTORQ ENGINE 102 34. Remove the clamp and take out the pipe with the air mass flow sensor connected to the turbocharger. 35. Remove front two tyres. 36. Disconnect the left and right drive shafts from the vehicle. (For removal procedures refer Transaxle section). 37. Use suitable belt/chain to fix a zip crane to the engine lifting hooks located at front and rear of the engine. 38. Raise the crane slightly up until very light pressure is applied to the engine. 39. Loosen and remove the 2 mounting nuts and one bolt on engine 'B' mount assembly. 40. Remove the mounting bolts of the “A” mount assembly. 41. Loosen and remove the “C” mount assembly mounting fasteners. Take out the mount assembly.