NEXON

FATC 17 CAUTIONS It is recommended to run the vehicle in re circulation mode to avoid clogging of air filter. 7. AIR DISTRIBUTION (MODE) BUTTON In AUTO mode, the FATC system will regulate the mode automatically. However, user override is possible with the use of MODE button to select the desired airflow. Each time you press the MODE button, the HMI display on the infotainment unit shows the mode selected. The Mode control shall happen either manually or through an automatic climate control algorithm. The simple flow diagram below shall describe the determination of the desired mode position. Mode control during Auto operation The Mode control shall switch to Auto operation after the user presses the Auto button. The climate control algorithm shall determine the desired mode position during Auto operation. The Auto operation shall select among Chest, Chest-Leg and Leg positions during the Auto operation. Since the system is not equipped with sensors to determine the windshield fogging criteria, the Defog and Defrost shall be selectable manually by the user. Mode control during Manual operation The Mode control shall switch to the Manual mode immediately after the user presses the mode button. In the Manual mode, the driver shall select the mode by pressing the mode pushbutton on the control head. The mode shall switch in a cyclic sequence as shown above for each press of the button. The display shall be updated as shown above corresponding to the current selected mode. 8. “OFF” BUTTON” Press the OFF button to switch OFF the system. The display will no longer show the climate control option when panel is OFF. 9. AUTO ON SELECTION BUTTON In the AUTO mode all the configurable parameters will be selected automatically except temperature selection To put the automatic climate control in fully automatic mode: a. Set the desired temperature by turning temperature control knob. b. Press the ‘AUTO’ button. c. The system automatically selects the proper mix of conditioned and/or heated air that will, as quickly as possible, raise or lowers the interior temperature to your preference. You can manually select various functions of the climate control system when it is in fully automatic mode. Making any manual selection causes the word ‘AUTO’ in the display to go OFF and overridden setting is displayed.