TIAGO TIGOR BSVI - SERVICE MANUAL - DTC 24-12-2021

TATA BSVI Gasoline Program – EMS ECU Bosch DTC Troubleshooting Service Manual Version: 1.2 Date: 18-12-2019 Prepared By: Sunita Mandlik Checked By: Yeshwant Jadhav Approved By: Satish Kumar Document Part No: 2921 02 xxx xxxx Page: 599 of 1498 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. P0481-13: Radiator Fan High Speed Relay Control Circuit – Circuit Open Overview: ISO Code P0481-13 Customer Symptom Engine Heat up and seize and damage components. Fault Effects (On Vehicle) Radiator Fan will not run, Engine Heat up and seize and damage components. Lamp Status (If Any) CE Lamp ON after 1 drive cycle Fault Detection Condition This fault gets logged if the Radiator fan control pin of EMS ecu is Open Circuited. Normal Operating Condition Healthy Wiring Harness connections between Radiator Fan relay and EMS ecu, Relay Fully Operational, Healthy Wiring Harness connections from Relay to Main Relay supply and Ground. Probable Trouble Area Improper Wiring Harness Connections, faulty Relay, Healing Condition Ignition key on and 1 drive cycle after fault rectification Fault permanent Deletion 1. Clear DTC Command form Scan tool 2. Stack Over Flow. 3. 40 warm up cycles. 4. ECU Flashing. 5. ECU Power-Fail Component Details: Radiator fan is driven by EMS ecu via a relay, Radiator Fan will be On, when the EMS ecu energizes the coil of fan relay. Preliminary Checks: 1) Loose/ Damaged Connections between Fan Relay and EMS ecu. 2) Loose/ Damaged Connections between Fan Relay and Battery supply or Ground. 3) Check for back out of pins at ECU connector. 4) Check for damage of pins at ECU connector. .