TIAGO TIGOR BSVI - SERVICE MANUAL - DTC 24-12-2021

Vehicle Platform: Zest, Bolt, Tiago, Tigor, Osprey, Q501, X451, Q502 ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 3.1 Date: 30-11-2019 Author: BCM COC Page: 874 of 1106 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting:- B192B-96: Proximity Sensor Rear Mid LH failure START Connect Diagnostic tool and check for DTCs Is DTC B192B-96 present? STOP NO Check DTC present is Permanent or Historic Is History? 1. Clear the DTC frommemory 2. Turn the IGN to OFF 3. Start the IGN Is DTC B192B-96 present? YES NO YES YES NO Disconnect vehicle battery connection. (Please follow the safety guidelines) Check LIN connection between BCM LIN 1(Connector1-Pin 35) and LHMid sensor Are connectors loose? Reconnect connectors firmly YES 1.Remove BCM side wiring harness Connector. 2.Perform visual check of connectors for pins bent or damaged etc. Is connector faulty? Correct connector fault (Terminals Bend) YES NO NO A B