TIAGO

BODY 21 5. Loosen and remove two mounting screws of the outer liner from the inner side of wheel arch. Follow the same procedure at the other end also. 6. Pry out the front bumper from wheel arch end. 7. Disconnect fog lamp connectors and remove the bumper. FITMENT For fitment follow the reverse procedure of removal. 9.2.7 REAR BUMPER REMOVAL 1. Open the tail gate. 2. Loosen and remove four rear bumper special screw on top side. 3. Loosen and remove all rear bumper screws and bolts which hold the rear bumper from bottom side.