TIAGO

ELECTRICAL 38 2. Remove two allen screws used for fitting the lamp housing on the bumper. 3. Pull out fog lamp in opposite direction of its fitting. REFITMENT: For refitment follow the procedure in reverse. BULB REPLACEMENT PROCEDURE: 1. Disconnect the electrical connection. 2. Remove the bulb assembly by rotating in anti- clockwise direction. 3. Take out the bulb from holder& replace with new one. 4. Fit the assembly by rotating in clockwise direc- tion. 5. Connect the electrical connection. 8.7 10 REGISTRATION PLATE LAMP REMOVAL AND REFITMENT OF REGISTRA- TION PLATE LAMP REMOVAL: 1. Gently pry out the lamp assembly from the rear bumper by pressing the mounting clip. 2. Disconnect the connector from lamp. REFITMENT: Carry out the fitment process in the reverse order of the removal.