TIAGO

SUSPENSION 44 17. Loosen and remove the twist beam bracket bolts on both sides. FIG. 78 18. Lower the twist beam along with bracket. FIG. 79 19. Remove the twist beam cross bolt on both sides. FIG. 80 5.9.4. TWIST BEAM BUSH REMOVAL Remove twist beam front pivot bush using special tools as shown in below arrangement. NOTE: Apply soap water to the bush and the bore of twist beam assembly before installation. FIG. 81  INSTALLATION 1. Install twist beam front pivot bush using special tools as shown in below arrangement. FIG. 82 2. Tighten the cross bolt of the twist beam. FIG. 83