TIAGO

1.05L REVOTORQ ENGINE 132 6. Install connecting rod bearing caps with mounting nuts. iv. FITMENT OF CYLINDER HEAD ON CYLINDER BLOCK : 1. Place the Cylinder Head gasket as shown. NOTE  Ensure that the "TOP" mark on the gasket is facing towards the intake manifold side of the block. Piston Projection MM Gasket Thickness MM Identification 0.66 - 0.69 1.3 1 Notch 0.70 - 0.79 1.4 2 Notch 0.80 - 0.89 1.5 3 Notch 2. Tighten the cylinder head mounting bolts from the outer to inner, in specified sequence . 3. Install the exhaust and intake cam shaft by aligning reference points on the gears as shown.