ZEST BOLT Service Manual

DRIVETRAIN-TA65 Star 67 7. Pry out the shifter selector cable ends from the transaxle housing. 8. Pull out the plunger from transaxle cable and remove it from the transaxle cable anchoring bracket. 9. Loosen the cable grommet nut mounting from firewall to remove the assembly. ASSEMBLY: 1. Refit the selector shifter cable over the transaxle bellcrank lever and assembly selector shifter shaft end 2. Pull and hold the plunger of the transaxle cable. Then snap fit the cables over the transaxle cable anchoring bracket. 3. Insert the cable through the firewall and tighten its mounting on it. 4. Position and tighten the assembly gear shift housing on the cab floor. 5. Refix the selector and shifter cable lock on the assembly gear shift housing 6. Fix the selector cable on the assembly gear shifter housing and leave the fastener over it just holding. 7. Tighten the selector cable fastener after ensuring the gear shift lever is in vertical position. 8. Push the shifter cable cup to the gear shift lever bottom end and lock it as shown. 9. Place the center console over the assembly and assemble it. 10. Then fix gear shift lever knob and Bellow.