ZEST BOLT Service Manual

Automated Manual Transmission 53 Hydraulic Selection Gearbox Shift Position Sensor Removal 1. Place the car on a lift. 2. Position the gear lever at N. 3. Connect the diagnosis equipment and car- ry out the accumulator depressurization procedure. 4. Remove protection/guard under engine. 5. Remove battery. 6. Remove battery support/drip tray. 7. Remove wiring for manual gearbox hy- draulic selection system on hydraulic selection unit 8. Remove hydraulic speed selection hydrau- lic actuator unit and clutch. 9. Loosen and remove the screws and re- move the electro-hydraulic selection gearbox gear engagement position sensor. 10. Remove the driver complete with O-ring. Hydraulic Selection Gearbox Shift Position Sensor Fitment 1. Place the driver (1a) back in its housing, complete with O-ring, taking care to at- tach the pin (1b) with the fork (1c). 2. Place the electro-hydraulic selection gear- box gear engagement position sensor in its housing, inserting the pin (1b) in the Sensor (1a).