ZEST BOLT Service Manual

Automated Manual Transmission 31 Electro hydraulic Selection Gearbox Activa- tion Hydraulic Unit Mounting Removal: Place the car on a lift. Position the gear lever at N. Connect the diagnosis equipment and carry out the accumulator depressurisation pro- cedure. Remove the Protection / guard under en- gine. Disconnect the Battery and remove the battery support and tray along with Bat- tery. Remove the electrical wiring harness from the gearbox hydraulic selection system on hydraulic selection unit. Remove the hydraulic speed selection hy- draulic actuator unit and clutch Loosen the screw (1a) and remove the gear selection dog (1b). Loosen the screws (1a) and remove the mounting for the gearbox electro-hydraulic selection system hydraulic actuation unit (1b). Remove the O-ring from the mounting for the gearbox electro-hydraulic selection sys- tem hydraulic actuation unit.