ARIA

CLUTCH 27 CLUTCH 4. Disconnect the hose connecting clutch master cylinder by removing the clamp. NOTE: Collect the fluid from the fluid reservoir in a clean container. OR Ensure that fluid does not fall from the hose. 5. Disconnect the clutch master cylinder from the clutch pedal by removing the spilt pin (1) and clevis pin (2). 6. Turn the CMC 45º in clockwise direction and remove it from the bayonet adapter slots NOTE • Be careful not to damage the master cylinder body. • Check for rust and scoring of clutch hose. FITMENT 1. Introduce the CMC into the bayonet adapter hole through slots (matching the bigger slot of CMC and bayonet adapter) and turn it 45º anti- clockwise to tighten it. NOTE • Be careful not to damage the master cylinder body while fitment. • Ensure that CMC is not over tighten and also not kept loose. 2. Push the pedal in order to align CMC pushrod fixing hole and pedal fixing hole. Fix the CMC push rod by fitting the clevis pin and split pin. 3. Connect the low pressure hose to CMC and reservoir end and fix them with hose clamps.