ARIA

CLUTCH 26 PRECAUTIONS ! CAUTION • Do not reuse the concentric slave cylinder and clutch master cylinder mounting bolts. • Bleed the system only after complete installation of hydraulic system and assembly of clutch and flywheel. • Fluid drained from the system should be discarded. • Any fallen and damaged parts should not be reused. • Use of mineral oil in the vicinity of clutch release system components should be avoided. A. CLUTCH MASTER CYLINDER REMOVAL 1. Disconnect the battery connections 2. Remove the stone guard and drain the clutch fluid from the hydraulic adapter. (For procedure refer clutch fluid draining procedure in this section.) 3. Pull out the clip using a screw driver and disconnect the high pressure line from clutch master cylinder by pulling it out. NOTE After disconnecting the high pressure line, plug the CMC opening with suitable cap to avoid entry of any contaminants.