HARRIER SERVICE MANUAL PART -1

STEERING 25 B. Intermediate Shaft (Bottom Column) : 1. Remove the RAP/Column bolt inside the driver cabin . 2. Remove the steering column by sliding up the column sliding i-shaft. 3. Disconnect the intermediate shaft from the top column. 4. Ensure proper marking on i-shaft & column before removing to maintaining & match the proper phase angle. 5. Pull out the I-shaft assembly from the cabin. REFITMENT: For assembly follow the reverse procedure of removal. C. Bottom Flange Coupling (Bottom UJ) : 1. Remove the stone guard. 2. Disconnect the bottom flange from the intermediate shaft by removing the mounting bolt. 3. Disconnect the bottom flange from the rack and pinion assembly by removing the mounting bolt and take out the bottom flange. REFITMENT: For assembly follow reverse procedure of removal.