HARRIER SERVICE MANUAL PART -1

STEERING 24 Removal Procedure of steering column has been defined in three processes: A. Top Column (Upper Column) B. Intermediate Shaft (Bottom Column) A. Top Column (Upper Column) : 1. Disconnect the top column from the intermediate shaft by removing the bolt along with the spring washer. 2. Remove Steering Wheel. (For procedure refer steering wheel removal process) 3. Remove master light switch from the upper RH cover. (For procedure, refer electrical section.) 4. Take out the upper nacelle, lower nacelle, LH side upper cover, RH side upper cover and lower cover of steering column. (For procedure refer body section.) 5. Remove the Combi-Switch and ignition switch. (For procedure, refer electrical section.) 6. Loosen and remove four mounting nuts of top column assembly. 7. Disconnect the brake pedal return spring from the steering column. 8. Take out the top column. REFITMENT: For assembly follow reverse procedure of removal.