SAFARI STORME MY14

ELECTRICAL 208 CONNECTION DETAILS: REMOVAL: 1.Remove rear bumper. ( Refer body section ). 2.Disconnect the electrical connection of sensor. 3.Snap out the sensor from its housing and take out the sensor. REFITMENT: 1.Carefully snap fit the sensor into housing by aligning the locator of the sensor. 2.Connect the electrical connection. 3.Fit the rear bumper. 2. REVERSE PARKING SYSTEM CONTROLLER: FUNCTION: The controller contains a voltage stabilizer for the sensors, an integrated microprocessor and all the interface circuits needed to adapt the different input and output signals. The controller will perform the following functions:  Sensor activation and echo reception  Obstacle proximity estimation  Activation of the warning elements  Evaluation of the input signals from the vehicle  Monitoring of the system components including fault storage  Provision of the diagnostic function FEATURES:  Obstacle distance detection – 0.3 m – 1.2 m.  Buzzer works only when ignition is on and reverse gear is applied.  Obstacle information to IRVM will be transmitted only when ignition is on and reverse gear is applied. SPECIFICATION: Normal voltage 12 Vdc ,-ve gnd Operating voltage 9 to 16 Vdc Operating temperature -30 °c to +80 °c Storage temperature -40 °c to +85 °c Obstacle detection 0.3 to 1.2 m