SAFARI STORME MY14

ELECTRICAL 195 ELECTRICAL 8.14 7. TELL TALES DESCRIPTION: 1. Turn Indicator (Left/Right): Turn signal lamps can be operated only when the ignition supply is ‘ON’ and by turn indicator switch on the combi-switch. The direction indicator arrow and on instrument cluster flashes with tic-toc sound along with external indicator lights. If the indicator does not blink or blinking fast, it means one of the external indicator bulb may be fused. Replace the bulb as soon as possible 2. High Beam Indicator: This indicator lights up when the headlamp high beam is ‘ON’. 3. Battery Charging Indicator: This indicator lights up when ‘IGN’ is turned ‘ON’ and goes ‘OFF’ after the engine starts. ! CAUTION If it remains ‘ON’ while the engine is running, it indicates that the battery is not charging. Check and rectify the problem. 4 Park Brake / Brake Fluid Oil level: This indicator has multiple functions as follows,  When ignition key is turned to ‘IGN’ position, it lights up for 3 seconds and goes off.  It lights up with “park brake On” text message when parking brake is applied and goes off when parking brake is released.  It lights up with “Brake fluid low” text message when brake fluid oil level is low. 5. Diesel Pre-Heat indicator : This indicator, applicable for diesel engines, comes on when engine starting-aid is provided by activating glow plugs. Engine should be started only after this indicator goes off. 6. MIL indicator: This indicator indicates your vehicle’s engine condition when a malfunctioning occurs in the engine, wiring harness and EMS etc. The functioning of this lamp is as below,  Comes “ON” when key is in ‘IGN’ position and goes ‘OFF’ when EMS performances the system check.  Remains ‘ON’ if any fault in the EMS system. ! CAUTION When “service/malfunction/Check Engine” lamp is ON while engine is running, engine’s performance deteriorates marginally and sometimes drastically. Check and rectify the problem.. 7. Low Engine Oil Pressure Indicator: When the ignition key is turned to the ‘IGN’ position, symbol lights up and goes off as soon as the required engine oil pressure is developed after starting the engine. If this indicator remains ‘ON’, when engine is running, it indicates a fault in lubrication system. Check and rectify the problem. 8. Low Fuel Indicator: It comes on when fuel level is low and needs fuel refilling at the earliest. In case of any related fault, it blinks. Check and rectify the problem. 9. High Temperature Warning: This indicator lights up when engine is hot, which may be due to insufficient coolant in the coolant tank or due to any other defect. Check and rectify the problem. ! CAUTION  Never remove the radiator pressure cap from the radiator when the engine is hot.  Do not restart the engine until the problem has been duly attended. 10. Water in fuel indicator: It will comes on when ignition is turned 'ON' and will goes off in ~ 3 seconds. This indicator lights up continuously if there is excess water accumulation in the sedi-menter, which needs to be drained. Check and rectify the problem. ! CAUTION If water is not drained from the sedimenter, it can cause serious damage to engine.