SAFARI STORME MY14

ELECTRICAL 88 REMOVAL: 1. Remove the combi-switch. ( Refer combi switch section ). 2. Disconnect the electrical connection of ignition Switch, immobilizer unit and key-in sensor. 3.Break heads of two mounting bolts ( self breaking type screws ) with the help of chisel. 4.Take out the assembly from its locating latch. INSPECTION: Inspect the switch continuity. If result is not as per specified, then replace the switch assembly. REFITMENT: 1.Disassemble the mounting bracket of new ignition switch. 2.Locate the ignition switch to steering column cutout with latch lock. ( Refer fitment details image) . 3.Tighten the ignition switch to steering column with the two self breaking screws. Tightening Torque for screws – 1.5 Kgm NOTE: There should not be any rotary movement of the lock on column when fully tightened as specified 4.Connect the electrical connection of ignition Switch, immobilizer unit and key in sensor. 5.Fit the combi switch assembly.