SAFARI STORME MY14

ENGINE 45 2.1.3 OVERHAULING 2.1.3.1 ENGINE DISMANTLING (ON STAND) NOTE Engine is mounted on the stand and all auxiliary components are removed. 1. Drain the engine oil. 2. Remove oil filter using special spanner. (Refer Oil filter removal ) 3. Remove HP pipes connected between the com- mon rail and injectors. NOTE: • After removing the HP pipes cover the opening with suitable caps. • Do not reuse the HP pipes once removed; use new HP pipes at the time of assembly. 4. Disconnect the injector back leak tube from all the injectors and cover openings with suitable caps. 5. Remove the leak off pipe from the HP pump. 6. Remove the Alternator / AC belt and stretch belt. ( Refer AC belt / Alternator belt and stretch belt removal in this group) 7. Remove the following components referring their respective groups for mounting details and pre- cautions. i. Alternator – Refer Electrical Group. ii. AC Compressor – Refer HVAC Group. iii. Power Steering Pump – Steering group. 8. Disconnect the EGR pipe connected between EGR module with EGR cooler valve and exhaust manifold.