SAFARI STORME MY14

Rear Axle 4 SECTION 1: GENERAL INFORMATION IMPORTANT SAFETY NOTICE Caution: The use of non-original equipment replacement a part is not recommended as their use may cause unit failure and/ or affect vehicle safety. Proper service and repair is important to the safe, reliable operation of all motor vehicles or driving axles whether they be front or rear. The service procedures recommended and described in this service manual are effective methods for performing service operations. Some of these service operations require the use of tools specially designed for the purpose. The special tool should be used when and as recommended. Caution: Extreme care should be exercised when working on components Utilizing snap rings or spring loaded retention devices. For Personal safety, it is recommended that industrial strength safety Goggles or glasses are worn whenever repair work is being done on any vehicle or vehicle components. Warning: SILICONE RUBBER SEALANT (RTV) AND LUBRICATING GREASE AND OI LS Silicone rubber sealant is used as a gasket material on Dana axles, as well as various lubricants for lubricating purposes. Before using any of these materials, one should become familiar with and follow all safety precautions as recommended by the product manufacturer/supplier. All personnel involved with these materials should follow good industrial hygiene practices (e.g. before eating, hands and face should be thoroughly washed. Eating, drinking and smoking should be prohibited in areas where there is potential for significant exposure to these materials). When discarding any of the materials, observe all local, state, and federal laws and regulations for proper disposal procedures. Lubricants: This manual specifies the minimum requirement that lubricant should meet, however it is recommended that the lubricants specified by the vehicle manufacturer be used, they may provide additional lubricating characteristics which may be required for your vehicle operation. Refer to your owner's manual for obtaining the proper lubrication specification. Always follow various lubrication instruction mentioned in the manual.