SAFARI STORME MY14

FRONTAXLE (4X4) 50 3. Install the shifter sleeve on the intermediate shaft through disconnect housing window while align- ing with the splines on it. NOTE Shaft splines and shifter sleeve must be free from foreign particles and burr 4. Install the synthetic bush in the bore of axle shaft with the help of special tool (Part No.287058903308) NOTE The pressing force on the bush should not be too high otherwise it can damage the bush. 5. Insert the Thrust washers in the sequence oppo- site to removal in the disconnect housing and insert the axle shaft through the bearing from wheel end side of the disconnect housing. 6. Now install the circlip on the axle shaft with the help of circlip pressing tool. 7. Ensure there should not be excessive play be- tween two shafts. This affects the disconnect operation. NOTE The front axle mounting bushes are press fitted and can be removed by pushing the bush using suitable press. ! CAUTION While removing or fitting the bush from a beam, en- sure that the axle beam is properly supported.