SAFARI STORME MY14

FRONT AXLE (4X4) 39 FRONT AXLE (4X4) 36.Once correct backlash and contact pattern is achieved insert the axle intermediate shaft. 37.Ensure the cleanliness of the carrier cover face and apply the uniform sealant bid along the car- rier cover face avoiding the bolt holes as far as possible. NOTE Use Anabond A-676 or 3M sealant 38.Install the carrier cover plate and locate it on the cover plate mounting studs on the carrier. Install and tighten the cover plate bolts to specified torque. (Refer service data for correct torque value) NOTE  Discard the old bolts and use new bolts for cover plate mounting as the bolts are coming with seal- ant patch on it and during tightening sealant patch wears off.  Reusing cover bolts may leads to leakage from cover bolts sides