SAFARI STORME MY14

FRONT AXLE (4X4) 35 FRONT AXLE (4X4) 22.Place differential assembly into housing. Install dial gauge and locate tip of indicator on the sur- face of one of the ring gear screws. Force differential case assembly away from pinion gear. With force still applied set indicator at 0 (Zero) . 23.Force differential case assembly and ring gear to mesh with pinion gear. 24.Rock the ring gear to allow teeth to mesh Repeat to obtain a stable reading. Record in given format as B. 1. Total amount of space measured without ring gear. Measurement A =……… 2. Total amount of space measured with gear. set assembled in carrier Measurement B=……… 3. Measurement A minus Measurement B dimensions Measurement C =……… Assemble shim pack using dimension determined in A, B, C adjusting the packs as described below. RING GEAR SIDE Assemble shim pack to measurement B- 0.125mm or B- 0.005” OPPOSITE SIDE OF RING GEAR: Assemble shim pack to measurement C. Add shim thickness 0.20 mm or 0.008” for differential bearing preload and backlash.