SAFARI STORME MY14

FRONT AXLE (4X4) 26 13.To remove side gears and pinion mate gears, rotate the side gears. This will allow the pinion mate gears to turn to opening of the case. Re- move pinion mate gears and spherical washers behind the gears. Lift out side gears and thrust washers. Inspect all parts including the machined surfaces of the case itself. Where necessary, replace all worn parts. If excessive wear is noticed on all parts, it is recom- mended that the complete differential assembly to be replaced. If any gears are to be replaced, they must be replaced as sets. 14.Remove end yoke using tool as shown.  Holder yoke. (Part.no.2894 5890 35 17) 15.If yoke shows wear in the area of seal contact, it should be replaced. 16.Remove pinion by tapping with mallet. 17.Hold the pinion with stand to avoid falling. !! WARNING Gear teeth have sharp edges. Handle gears carefully to avoid injury. 18.Collect shims and keep them together. Replace shims if found damaged. NOTE Discard collapsible spacer. New one is required to be used during assembly