SAFARI STORME MY14

FRONT AXLE (4X4) 24 4.5.2.3.3 DISMANTLING INSPECTION AND AS- SEMBLY A. DIFFERENTIAL CASING DISMANTLING 1. Loosen and remove the 9 bolts and 2 nuts and take out the differential cover. NOTE Liquid Gasket is used for seal carrier section with banjo beam. Scrap this sealant and clear it. 2. Remove bearing caps by removing bearing cap bolts. NOTE Identification mark is punched on bearing cap; this is to ensure correct bearing cap is installed on correct side. Ensure correct bearing caps used while reas- sembly. 3. Pry out differential case from carrier with help of tommy bars (Part No.289458903521) (Qty.2 Nos.) 4. Remove side bearing cone from differential case assembly using special tool mentioned below.  Adapter, differential bearing cone (Part No.2870 5890 33 22)  Press (Part No. 2894 5890 35 19) 5. Identify shims and side bearing on both sides. They are not to be interchanged during assembly. 6. If shims are damaged, replace with new shims during assembly.