SAFARI STORME MY14

REAR SUSPENSION 32 5.2.2 MAINTENANCE 5.2.2.1 ON VEHICLE REPAIRS A. ANTIROLL BAR REMOVAL 1. Hoist the vehicle on two post lift & remove the wheels. 2. Remove the wheel speed sensor wiring by removing the separator clamp from Anti roll bar from both ends. 3. Lock the ball joint from being rotated using an Allen key (5mm) and disconnect the antiroll bar from the ball joint assembly by loosening the nyloc nut. Follow the same procedure at the other end also. ! CAUTION Make sure that before loosening the nyloc nut one should use Allen key (5mm) to hold the ARB link ball stud otherwise it may damage the ball joint. 4. Loosen and remove two mounting screws of bearing block bracket. Follow the same procedure at other end also. 5. Remove the anti-roll bar assembly. 6. Remove the ball joint assembly from the bracket on the rear axle by removing the bottom nyloc nut. Follow the same for other end also.