SAFARI STORME MY14

FRONT SUSPENSION 21 FRONT SUSPENSION B. UPPER WISHBONE BUSH 1. Remove the Upper Wishbone suspension bush using special tool assembly (Part No. 2870 5890 01 12) as shown in below arrangement. 2. Mount the upper wishbone assembly on to the fixture (1) and lock the same by tightening the socket head screws (4 Nos.) of the upper plate and tighten the grab screw (3 Nos.) of the support to lock the bush housing for any movement while pressing out the bush. 3. Place the drift (2) between the Upper Wishbones as shown in figure. 4. Place the base between the drift and upper wishbone and insert the Extension (3) through the rubber bush and lock it with the base. 5. Press the Extension with the hydraulic press and take out the Wishbone bush. NOTE Follow the same procedure for bush removal at other end.