SAFARI STORME MY14

TRANSFER CASE 43 TANSFER CASE NOTE  Before replacing the malfunctioning parts with defective codes, check the wires and connectors for proper condition.  Use only 12V 3-watt bulb for diagnostic purpose. If only one part is malfunctioning, the indicator light will display defective code three times continuously. If more than two parts are malfunctioning, the first malfunctioning part will be displayed three times and then the other malfunctioning parts will be displayed. After repair, clear the fault stored in the memory. Ground the service connector and keep ignition ‘ON’ for five seconds continuously to erase defective code. Defect Code Diagram Connect a service connector as described earlier. Turn the ignition switch ON 4H or 4L CHECK indicator will turn ON for 0.6 seconds and turn OFF for 3 seconds. Then it will display a defective code 3 times continuously. SR. NO. DEFECTIVE CODE MALFUNCTIONING PART 1 ECU 2 Shift Motor 3 Synchronizer Clutch