SAFARI STORME MY14

GEAR BOX 62 21.a).Apply adhesive gasket eliminator over adaptor face and fit it over the rear half housing and put the hexagonal flanged nuts (1) and (2) and tight- en them evenly. (For 4X4 Version only) 21. After the shim selection at rear end front shim selection has to be done (for counter and main shaft) as per the procedure given below: FRONT COVER SHIM SELECTION PROCE- DURES A. DRIVE SHAFT (SHIM SELECTION) Calculate the shim values as illustrated below: • Measure the front cover depth along with the gasket at the drive shaft end. Consider this as “P”. Let this depth be 5.75 mm. • Measure the drive shaft bearing projection over housing face. Consider this as “Q”. Let this pro- jection be 5.50 mm. • Calculate the difference between “P” & “Q”. Let it be “R”. R = P – Q R = 5.75 – 5.50 mm R = 0.25 mm • Thickness of shim required to maintain the end play of 0.07 to 0.1mm = R – (0.1 Specified end play) = 0.25 – 0.1 mm = 0.15 mm B. COUNTER SHAFT (SHIM SELECTION) Calculate the shim values as illustrated below: • Measure the front cover depth along with the gasket at the counter shaft end. Consider this as “T”. Let this depth be 4.75 mm.