SAFARI STORME MY14

GEAR BOX 54 ASSEMBLY 1. Heat the plastic bush by immersing it in the hot oil. 2. Apply a light coat of grease 3% MOS 320 over gear shifter lever ball seat. 3. Press the bush over the shifter lever ball and al- low the plastic bush to cool down such that it is seated properly on the lever ball. ! CAUTION Slide the lever eye end edges through the slots pro- vided on the plastic bush. Otherwise the edges can damage the plastic bush. 4. Slide the “O” ring on the groove of plastic bush. 5. Press the gear shifter lever along with the bush inside the bore of extension arm. NOTE While pressing care should be taken that the arrow marks on the bush should be perpendicular to the extension arm. 6. Lock the bush on the extension arm by turning the lever and bush assembly in the clockwise di- rection by 90º such that the arrows on the bush should be inline with the extension arm as shown below.