SAFARI STORME MY14

HVAC 55 10.3.3 FRONT HVAC UNIT REMOVAL 1. Discharge the refrigerant using standard recover- ing equipment. 2. Remove dashboard assembly. (For procedure refer dashboard removal procedure in Body sec- tion.) 3. Disconnect all electrical connections. 4. Loosen and remove bolts and disconnect the inlet and outlet lines i.e. high pressure line and low pressure line and plug the ports. 5. Drain the coolant. 6. Disconnect the Heater inlet (1) and heater coil outlet (2) pipes. !! WARNING • The heater pipes contain hot coolant which may spill out when disconnected, even if the coolant is drained, so be careful while disconnecting them. • Keep a suitable container below to collect the coolant that will flow out. 7. Loosen and remove the mounting bolts of support tube on both side of HVAC unit and take out the tubes. 8. Loosen and remove mounting bolts (7 Nos) as shown in figure below and take out the HVAC unit. FITMENT For fitment follow the reverse procedure of removal.