SAFARI STORME MY14

SUPPLEMENTARY RESTRAINT SYSTEM (SRS) 20 ON VEHICLE REPAIR REMOVAL !! WARNING The system has back-up power for about 30 seconds after the battery is disconnected. Wait for at least ONE minute after disconnecting the battery before servicing the vehicle to prevent accidental deploy- ment and personal injury. 1. Disconnect the battery connections. 2. Remove the Driver Air bag (DAB.) (For proce- dure refer DAB removal in this section). 3. Remove the steering wheel (For procedure refer steering wheel removal procedure in Steering system). 4. Remove the lower nacelle and the upper nacelle assembly. (For procedure refer body section) 5. Remove four mounting screws of clock spring and take out the clock spring. FITMENT ! CAUTION Care should be taken that before fitment of clock spring, make sure that the steering wheel and the vehicle is in straight ahead position. For fitment follow the reverse procedure of removal. NOTE After fitment of clock spring on Combi switch align the clock spring as follows: CLOCK SPRING ALIGNMENT PROCEDURE ! CAUTION If this alignment is not done the clock spring may get severely damage.  Make sure the steering wheel & the vehicle is in straight position .  Rotate the clock spring rotor in clockwise direc- tion till it reaches the maximum limit of rotation.  Turn the clock spring in anticlockwise direction for 3 rotations from this extreme position. This will be the straight ahead position of the clock spring.