SAFARI STORME MY14

SUPPLEMENTARY RESTRAINT SYSTEM (SRS) 8 C. SEAT BELT (PRE-TENSIONER) Seat belt assembly can be directly held in bench vice. Seat belt webbing length could be cut prior to deployment. 5. Use a 2 core electrical wire at least 15m long, and connect to the pig-tail. 6. Place a vehicle battery or equivalent source at a distance of 15m from the restraints module as- sembly. The battery voltage shall be in the range of 8-16V. 7. Connect one core of the electrical wire to the positive (+ve) battery terminal. DO NOT CON- NECT THE OTHER CORE WITH NEGATIVE (- ve) BATTERY TERMINAL. 8. Make sure that no person is present within 15m radius of the "to be disposed" module assembly. 9. Connect the other core of the electrical wire with the negative (-ve) battery terminal for deploy- ment of module assembly. 10. After deployment, wait for at least 10 minutes to ensure that none of the components within the module assembly is too hot. 11. Take out the deployed module assembly from bench vice and conduct suitable activities to- wards scrapping of the constituent components. Airbag module assemblies are generally made up of aluminum, stainless steel or mild steel, ny- lon, plastic etc. After the module assembly is removed from bench vise, the constituent com- ponents could be scrapped as per the guide- lines/laws for non-hazardous waste materials 11.1.6 COMPONENTS 11.1.6.1 RESTRAINT WITHOUT AIRBAGS Restraints system without airbags consists of follow- ing main components:  Seat Belt.  Emergency Locking Retractor (ELR).  Micro-switch. A. SEAT BELT With these seat belts occupants have to buckle the seat belts before starting to drive the vehicle. B. EMERGENCY LOCKING RETRACTOR (ELR) It is a locking mechanismwhich is activated in follow- ing conditions:  When a sudden deceleration is sensed  When the seat belt webbing pull-out speed ex- ceeds a threshold value  When one side of the vehicle is more inclined than the other side. e.g. If one of the vehicle tyre goes off-road during driving. C. MICROSWITCH AND SEAT BELT REMINDER (SBR) WARNING LAMP Micro switch is a device which indicates the condition of the seat belts. This switch activates the warning light (which is in the instrument cluster ) if the seat belts are not buckled properly.