SAFARI

20 FRONT AXLE - 4 X 4 Torque the inner locknut to 68 Nm. using spanner Pt. no. 2704 5890 3318 Fig. 20 Rotate hub, then back off inner locknut 90 degrees maximum and assemble lock washer by turning inner locknut to the nearest hole in lock washer. Install outer locknut and torque 203-305 Nm. Final bearing adjustment to have 0.00 to 0.10 mm total end play. Maximum torque to rotate the hub is 2.3 Nm (When end play is 0.00) Install axle shaft in the spindle. Reassemble assembly outer brake. Install washer and Reassemble the snap ring to the axle shaft. Reassemble the hub - lock assembly Note : Refer hub lock installation and removal procedure. Screw in the allen screws and tighten to specified torque. Fig. 20 Fig. 21 Front hub exploded (Dana Spicer) 4X4 non ABS Wheel End Components : (See Fig. 21)