SAFARI

31 TRANSFER CASE External Electric Shift Refer fig. 38&39 Align the motor with shift shaft and position the motor assembly onto the cover. Install the motor to the shift shaft and contact cover. Rotate the motor clockwise direction to check correct engagement. Insert the O-ring on the speed sensor and install the speed sensor assembly to the cover. 6. BOLT 7. WASHER 8. BOLT 9. SENSOR & HARNESS BRACKET 10. SENSOR ASSY. 11. SPEED SENSOR 12. O-RING 13. MOTOR ASSY. 25. COVER 13. MOTOR ASSY. 103. SHIFT SHAFT 1. NUT 2. WASHER 3. SEAL 4. REAR YOKE 5. PLUG 25. COVER EndYoke Fig. 40 Install the two plugs to the cover. Install the end yoke, seal and washer. Holding the end yoke tighten the nut. Note : Apply Loctite 262 to nut before installation Fig. 38 Fig. 39 Fig. 40 Install the bracket to the motor assembly and tighten three bolts.