NEXON EV SERVICE MANUAL

HV ELECTRICAL SYSTEM 66 B. CRADLE REMOVAL NOTES  Accessibility of PDU assembly fasteners from top side  Accessibility of dc-dc converter & charger fasteners from bottom side  Dc-dc converter to be assemble before charger. 1. Refer Instructions for working on HV Components mention before starting work. 2. Remove Auxiliary (12V) battery (Refer Auxiliary battery removal procedure in LV Electrical section). 3. Remove PDU (Refer PDU removal procedure). 4. Remove DC-DC Converter & OBC Charger unit. (Refer DC-DC Converter & OBC Charger unit removal procedure). 5. Remove E Drive (Refer E Drive removal procedure). 6. Remove Compressor (Refer Compressor removal procedure). 7. Remove mountings on cradle assembly, take out bracket, and suction pipe compressor end at the main line. 8. Remove Chiller Unit (Refer Chiller Unit procedure). 9. Remove Vacuum pump (Refer Vacuum pump procedure). 10. Support the Cradle assembly suitably. 11. Remove 2 mounting bolts at “A mount “of cradle. 12. Remove 2 mounting bolts at “B mount “of cradle. 13. Take out the Cradle from vehicle.