NEXON EV SERVICE MANUAL

FATC 13 Directs air through the center, side and foot well vents Directs air through the foot well air vents Directs air through the defroster & foot well vents (De-fault fresh air mode) Directs air through the defroster vents (Default fresh air mode) viii. “OFF” BUTTON” Press the OFF button to switch OFF the system. The display will no longer show the climate control option when panel is OFF. ix. AUTO ON SELECTION BUTTON To put the automatic climate control in fully automat- ic mode: A. Press the ‘AUTO’ button. B. Set the desired temperature by turning tempera- ture control knob. The display will show all the functions during ‘AUTO’ mode. C. The system automatically selects the proper mix of conditioned and /or heated air that will, as quickly as possible, raise or lower the interior temperature to your preference. D. When you set the temperature to it lower limit (-) or upper limit (+), the system runs at full cooling or heating only. It does not regulate the interior temperature. Semi-automatic Operation You can manually select various functions of the cli- mate control system when it is in fully automatic mode. All other features remain automatically con- trolled. Making any manual selection causes the word ‘AUTO’ in the display to go OFF and overridden setting is displayed. System will remain in semi- automatic mode till ‘AUTO’ is re-pressed. NOTE In ‘AUTO’ mode, the FATC systemwill regulate the blower speed automatically. x. TEMPERATURE CONTROL KNOB Turning the temperature control knob clockwise in- creases the temperature of the air. The desired temperature will be increased by steps of 0.5ºC. Us- er can select temperature range from 18ºC to 30ºC. Whereas the anticlockwise direction decreases the temperature. When you set the temperature to its lower limit (-) or its upper limit (+), the system runs at full cooling or heating only. It doesn’t regulate the interior tempera- ture.