NEXON EV SERVICE MANUAL

FATC 12 ii. BLOWER SPEED CONTROL KNOB (Round knob) Rotate the knob clockwise to increase the blower speed up to MAX (Speed 7), whereas anticlock- wise would reduce the speed up to Min (Speed 1). iii. ECON Button During ECON AC operation, the system automatical- ly cuts off compressor at a higher temperature than normal AC. The operation can be used during mild weather conditions for battery saving. Comfort level may be compromised during this oper- ation. By pressing ECON button text will be displayed on display. iv. MAX DEFROST BUTTON a. This button directs the main airflow towards windscreen for faster defrosting (It also over- rides any mode selection you may have made.) b. When you turn off the button, the system returns to its former settings. On pressing this button, the LED is illuminated indicating air distribution to max defrost mode is ON. CAUTIONS: For your safety make sure you have a clear view through all the windows before driving. v. REAR WINDOW DEMISTER BUTTON: This button turns the rear window demister ON or OFF. The system will be deactivated after 15 min of continuous operation. vi. FRESH AIR / RECIRCULATION BUTTON: When the recirculation Button or LED is switched ‘ON’, air from the vehicle’s interior is sent throughout the system. When the recirculation button is switched ‘OFF’, air is brought in from outside of the vehicle (fresh mode). Whenever discomfort is felt, switch to fresh air mode. NOTE The outside air intakes for the climate control sys- tems are at the base of windscreen. Keep this area clear from leaves and other debris. The system should be used with recirculation air mode for faster heat up and cool down, however keeping the system in recirculation mode, particularly with AC OFF, can cause the windows fog up. vii. AIR DISTRIBUTION (MODE) BUTTON: In AUTO mode, the FATC system will regulate the mode automatically. However, user override is pos- sible with the use of MODE button to select the desired airflow mode. Each time you press the MODE button, the display shows the mode selected. Directs air through the center and side air vents