NEXON EV SERVICE MANUAL

SUSPENSION 43 • INSTALLATION 1. Install twist beam front pivot bush using special tools as shown in below arrangement. 2. Tighten the cross bolt of the twist beam. 3. Lift and properly position the twist beam along with bracket. 4. Tighten the four bolts on bracket from both sides. 5. Fix the shock absorber and coil spring to the torsion beam. (Refer the refitment of shock absorber and coil springs) 6. Fix the back plate assembly along with brake shoes and stub axle to the torsion beam. 7. Fix the brake lines, parking brake cable and rear sensor cable mountings on the torsion beam. 8. Fit the brake drum. 9. Top up the brake fluid and carry out the bleeding of brakes. (Refer brakes). 10.Fix the Wheels.