514 / 1119
TRANSAXLE - TA5260
1
1. TECHNICAL SPECIFICATIONS:
TYPE
Synchromesh on all forward gears and sliding mesh on reverse gear.
OIL CAPACITY
2.1 Liters
OIL SPECIFICATION
GEAR OIL EP80WLL NEXT GEN SS6582
MODEL
TA5260 with 5 speed Manual (5 forward and 1 reverse)
GEAR RATIO
GEAR
DIESEL
1st
3.667
2nd
1.913
3rd
1.219
4th
0.895
5th
0.690
REV.
3.545
FD
3.737
GEAR SHIFT
Cable type floor mounted with international H Pattern with reverse lift & shift
arrangement.
2. PRECAUTIONS:
1. Do not lubricate the Shifter Selector Cables.
2. Use sealing anaerobic compound for all oil seals O.D.
3. Ensure that the engaging gears are properly seated over their respective splines.
4. Ensure that the Shifter finger lugs of transaxle are in line with each other while assembling the top cover
assembly.
5. Keep off the oil from clutch disc, flywheel and pressure plate surface.
6. Ensure that the oil seals are free from dust particles.
7. Use only recommended transaxle oil.
8. Do not reuse the oil seal, while assembling transaxle.
9. Lubricate drive shaft birfield and tripod joint only with grease gun as referred in manual.
10. Ensure that the boots are not damaged during assembly of driveshaft.
11. Assemble and remove the transaxle component bearings only with special tools.