643 / 924
ELECTRICAL
25
Stop (Brake) lamps
not working
1. 8 pole tail lamp connector loose
Tighten the connector properly
2. Bulbs fused
Fix the bulbs properly. Replace bulbs
if blown
3. Brake lamp switch faulty
Replace switch
Stop Lamps are controlled by BCM. If issue not resolved by above methods, BCM
diagnosis should be referred.
Stop(Brake)
Lamp
and High Mounted
Stop
Lamp
not
working
1. Stop Lamp and High Mounted Stop
lamp 10A. Fuse in Cabin Fuse Box Blown Replace Fuse
Single front parking
lamp not working
1. Head Lamp connector
Fix connector properly(10 pole) loose
2. Grounding point loose
Tighten the grounding properly
3. Bulb fused
Fix the bulb properly. Replace bulb if
blown
4. No output from BCM
Refer BCM Diagnosis
5. Parking lamp LH/RH fuse (5A) Cabin
fuse box loose/blown the circuit and then
replace
Fix the fuse properly in the base. i n
If blown, check for short in the fuse
Single rear parking
lamp not working
1. Grounding point loose
Tighten grounding properly
2. Parking lamp LH/RH fuse(5A) Cabin
fuse box loose /blown
Fix the fuse properly in the base, i n
if blown, check for short in the circuit
and then replace the fuse
3. Bulb fused
Replace bulb if blown
4. Battery supply not reaching lamp
LH/RH fuse input the discontinuity in the
circuit.
Check the continuity from p a r k i n g
battery to the lamps through the
combi-switch, Front W/Hand Floor
W/H connectors and rectify
5. No output from BCM
Refer BCM Diagnosis
Both parking lamps
not working at all
1. Combi switch connectors loose
Fix the connectors properly
2. Combi switch faulty
Replace combi –switch
3. No output from BCM
Refer BCM Diagnosis
Registration plate
lamp not working
1. Bulb fused
Replace bulb
2. Grounding point loose
Tighten grounding properly
3. 2 pole lamp connector loose
Fix connector properly
Cabin lamp not
working in ‘ON’
position
1. Bulb fused
Fix the bulb properly. Replace bulb if
blown
2. Switch erratic
Replace roof lamp
3. 3 pole Roof lamp switch connector
loose
Tighten the connector
4. No output from BCM
Refer BCM Diagnosis
CONNECTION DETAILS
For Circuit refer Circuit Schematic section.