Background Image
Table of Contents Table of Contents
Previous Page  242 / 948 Next Page
Information
Show Menu
Previous Page 242 / 948 Next Page
Page Background

STEERING

9

Restriction in return line or line too

small in diameter.

Clear restriction/kinks, if hoses are same as

OE. If not replace the return line with

specified one. Fill and bleed the system as

per procedure.

Oversize tyres.

Check specifications and replace with

recommended size tyres.

F)

Present

as

intermittent loss

of

power

assistance.

Pump’s drive belt slip or worn out

belt.

Adjust belt tension or replace belt and adjust

as required.

Pump malfunctioning as no

immediate return of flow rate on

the load valve from closed

position.

Repair or replace the pump as required.

COMPLAINT

AS MAY BE NARRATED BY CUSTOMER

STEERING WHEEL

KICK/SHOCK/

VIBRATION

Kick back rough steering

Bump steer Vibration in steering wheel

CONDITION

POSSIBLE CAUSE

REMEDY

Prevalent

when

turning

at

low

speeds, particularly

at rough roads or

turning at engine

idle speed while

vehicle

is

stationery.

Engine idling speed low/erratic

tending to stall when the steering

wheel is turned affecting steady

minimum flow from pump.

Adjust the engine speed for steady idling

rpm.

Air in the system or Power

Steering oil too low.

If oil level is too low, look for external leak. If

any, correct and fill oil and bleed the system.

Looseness or lash in steering

system that may be drifting under

load when turning.

Determine by inspection from steering wheel

to steered wheels, links/joints/mountings for

looseness /wear/ crack. Renew/replace the

affected part (s).

Improperly adjusted steering gear.

May be Rack guide (Yoke) has

backed off excessively or worn

gear

Adjust the rack guide to specification. If

problem is not corrected, replace the

steering.

Front shock absorber / suspension

strut malfunctioning.

Replace

the

defective

shock

absorber/suspension strut.

Vibration / shock /

kick

felt

when

turning the steering

wheel to lock.

Pump stops momentarily due to

belt slipping on drive pulley.

Adjust the belt tension to specification.

COMPLAINT

POSSIBLE CAUSE

REMEDY

Steering

bellow

noise

Grease at steering bellow missing

or less in quantity.

Apply 4-5 gms of grease as specified.