822 / 948
ELECTRICAL
197
paired keys shall be erased from memory and exit
from the routine. If BCM is in continuation of
routine
execution process for 1st key then it shall update
this byte as 0x00 upon routine result response
from
tool (i.e., 71 03 34 0E 04(RS) 00 00), during 2nd
key execution shall update as 0x01(previous key
paired
status i.e, 71 03 34 0E 04(RS) 00 01), and Tool
shall again request the same after some time.
6. Tool shall request the Routine results to BCM
every 2secs of time till the routine execution is
complete either
successful or unsuccessful.
7. BCM shall update DID 4429 with key ID after
each successful key paring.
8. After successful learning of all keys tool should
display “
Keys learning routine execution is
successful”
and
shall stop further actions by user.
15.Update BCM ECU VIN with following
procedure
a.
Turn the IGN ON again and Unlock security
to BCM ECU with the help of diagnostic tool.
b.
Read VIN from BCM ECU (22 F1 90)
c.
Write correct VIN in BCM ECU (2E F1 90 XX
XX . . . . . )
d.
Read VIN from BCM ECU (22 F1 90) and
verify.
16.Configure the BCM ECU (parameterization of
BCM ECU) with following steps
a.
Turn the IGN ON again and Unlock security
to BCM ECU.
b.
Perform the parameterization as per vehicle
variant with the help of diagnostic tool.
c.
Power Latch - Ignition->OFF->ON transition.
(Make sure is key is taken out).
d.
Read and confirm configuration data from
BCM against server.
17.Read the DTCs and clear all the DTCs from
BCM ECU with the help of diagnostic tool.
18.Provide IGN off-on cycle.
19.Read the DTCs from BCM ECU with the help
of diagnostic tool. If any DTC is present follow
the respective troubleshooting procedure to
rectify it.
20.Execute Service Test Routine for BCM ECU
a.
Execute BCM EOL Self-test routine (31 01
20 01)
b.
Read the DTCs from BCM ECU with the help
of diagnostic tool. If any DTC is present
follow the respective troubleshooting
procedure to it.
c.
Execute Input switch test routine (31 01 34
09 06)
d.
Read Input switch test routine results with the
help of diagnostic tool. If any DTC is present
follow the respective DTC troubleshooting
procedure to rectify it.