Background Image
Table of Contents Table of Contents
Previous Page  53 / 1265 Next Page
Information
Show Menu
Previous Page 53 / 1265 Next Page
Page Background

1.2L REVOTRON ENGINE

15

'Tapping' or 'ticking' noise from

the top end of the engine

Fuel

injectors

worn

excessively

Fuel injectors will make some

ticking noise. Replace fuel injectors

if not putting out enough fuel to

cylinders.

Excessively worn camshaft

Inspect camshaft. lobes and runout

for excessive wear. Replace as

necessary.

Valve springs, tappets, or

rocker arms worn

Inspect valve train components;

replace as necessary.

5. Exhaust System

Condition

Possible Cause

Remedy

Engine emits white smoke from

tailpipe.

Obstructed air filter or air Inlet

Clean or replace air filter or Inlet.

Head gasket leaking coolant

into combustion chamber

Inspect engine oil for coolant and

perform engine compression test.

Engine cylinder head or block

cracked

Inspect engine oil for coolant and

perform engine compression test.

Engine oil or other substance

on exhaust manifold

Inspect exhaust manifold for

foreign material.

Improper

grade

or

contaminated fuel

Rush fuel system with fresh, clean,

fuel of the correct type. Replace

fuel filter.

Mix of oil and water in oil

cooler

Check for oil and water mix up in

oil cooler. Flush and clean.

Engine emits blue smoke from

tailpipe.

Worn or damaged valve

guide seals

Remove rocker arm cover and

inspect valve guide seals. Replace

as necessary.

Engine crankcase overfilled

with oil

Check oil level; drain oil as

necessary.

Worn

I

damaged piston

ring(s) or cylinder bore,

permitting oil blow-by

Perform engine compression test

and/or leak-down test.

Head gasket leaking oil into

combustion chamber

Inspect engine coolant for oil and

perform engine compression test.

Engine emits black smoke from

tail pipe.

Excess carbon deposits in

combustion chamber

Remove carbon deposits in

combustion chamber using a

commercially available cleaner

Excess

fuel

entering

cylinder(s)

Check lambda/O2 and other

engine

sensors

for

proper

operation.

Test fuel injectors for proper

operation or leakage.

Check the fuel and emissions

system for proper operation.

Exhaust rubber hanger wear /

crack.

Ageing of rubber hanger

Check the Exhaust rubber hangers

& replaced if found crack / damage

or wear.