WIRING HARNESS REPAIR MANUAL

WIRING HARNESS REPAIR MANUAL 64 CONNECTORS UNDER SCOPE OF REPAIR-CAR The side cover of the connector needs to be slid out, it comes out by small push also. Please ensure that the chamfered portion of the tool in the outward side and press the lance. Once terminal lance is pressed, we need to take the wire out gently. Picture-68 There is one back support (Black colored, as shown above in Picture-68) for the Immobilizer connector, which needs to be taken out completely for accessing the wire terminals. Once the connector case is taken out, we can take out the complete terminal block. After taking out the complete terminal block, we can notice the locking mechanism of the terminals; hence, we need to press the lance of terminal below the locking cavity using the prescribed primary lock removal tool and take it out softly. Please be careful while doing the repair activity over this connector as the wall of the terminal block is brittle in nature and your unnecessary effort application can damage the connector.