WIRING HARNESS REPAIR MANUAL

WIRING HARNESS REPAIR MANUAL 46 CONNECTORS UNDER SCOPE OF REPAIR-UV The secondary lock tool to be inserted in the slot of secondary lock and lifted it outside. Please be careful while inserting the primary tool tip in primary lock. We need to unlock from both the sides -up & down, where locks are holding the terminal. Picture-39 Please note that the locking mechanism of this connector employs double locks- one above the terminal and other below the terminal. We need to lift the plastic locks a little bit up and at the same time push the wire gently out. You can use a nose plier to take the secondary lock gently out of the connector. During this, we need to take extreme care for the connector’s plastic poles and other near-by pins which must be kept safe for locking mechanism of the connector.