STEERING
44
11.Donot remove the protective cap from the input
shaft during transit or before assy.
12.Donot remove the protective cap from the OBJ
during transit or before assy.
13.Donot start the engine without filling power
steering fluid in the System.
14.Donot do the wrong entry of the tread at pres-
sure & Return port when connecting the
hydraulic pipes in Steering gear.
15.Donot use cotton waste for cleaning.
DO’S
1. Lift steering gear by holding mountings / body /
cylinder only.
2. Store / transport steering gear resting on body /
cylinder only.
3. Use steering gears on ‘first in first out’ basis.
4. If any steering gear is dropped, inspect for dam-
age before using.
5. If any bellow is found damaged, replace it imme-
diately with a good part & with proper position of
clips
6. If any bellow clip is found missing, do not use the
defective steering gear. Instead use another new
steering gear
7. If the steering gear is off the vehicle, all ports
should be covered with protective plugs to avoid
contamination.




