SAFARI

Repair Guideline

Tester-Display

No.

Work Instructions

Set Value

Fault Codes Connection

Troubleshooting :

Set Value :

Causation :

ABS REPAIR GUIDELINES

14 RL Speed Sensor Ignition on

more than C1201 RL sensor(pin9)

Range/Performan- With vehicle jacked up, 40 km/h (26 m/h)

Ground RL(pin8)

ce Plausibility fault slowly turn RL wheel by

hand

diagnostic-tester

drive vehicle

display approach-

ing speedometer

display

Important Notes:

• Ignition OFF before the plug connector will divided from the wheel- speed sensor.

• Couple the diagnostic tester,

Ignition on

• ABS and brake

• Speed Wheel Sensor or lines interrupted

warning lamp (temporary or static)

illuminate

• Read the DTC.

• Impulse Wheel fault

• Check the wheel-speed and

• Wheel- speed by • Intermittent contact between wheel-

correlation of the wheel to the sensors wheel RL

speed sensor to cable harness(connector)

• Check wheel-speed signal of the • Wheel- speed must • Air gap between sensor and impulse

correct min value

be always existent. wheel.

• Wheel speed more

than 2 km/h(under

test-bench wheel

speed the same as

the rollers)