572 / 1235
Rear Axle
4
SECTION 1: GENERAL INFORMATION
IMPORTANT SAFETY NOTICE
Caution:
The use of non-original equipment replacement a part is not recommended as their use may cause
unit failure and/ or affect vehicle safety.
Proper service and repair is important to the safe, reliable operation of all motor vehicles or driving axles
whether they be front or rear. The service procedures recommended and described in this service manual
are effective methods for performing service operations. Some of these service operations require the use of
tools specially designed for the purpose. The special tool should be used when and as recommended.
Caution:
Extreme care should be exercised when working on components
Utilizing snap rings or spring loaded retention devices. For
Personal safety, it is recommended that industrial strength safety
Goggles or glasses are worn whenever repair work is being done on any vehicle or vehicle components.
Warning:
SILICONE RUBBER SEALANT (RTV) AND LUBRICATING GREASE AND OI LS
Silicone rubber sealant is used as a gasket material on Dana axles, as well as various lubricants for
lubricating purposes. Before using any of these materials, one should become familiar with and follow all
safety precautions as recommended by the product manufacturer/supplier. All personnel involved with these
materials should follow good industrial hygiene practices (e.g. before eating, hands and face should be
thoroughly washed. Eating, drinking and smoking should be prohibited in areas where there is potential for
significant exposure to these materials).
When discarding any of the materials, observe all local, state, and federal laws and regulations for proper
disposal procedures.
Lubricants:
This manual specifies the minimum requirement that lubricant should meet, however it is recommended that
the lubricants specified by the vehicle manufacturer be used, they may provide additional lubricating
characteristics which may be required for your vehicle operation. Refer to your owner's manual for obtaining
the proper lubrication specification.
Always follow various lubrication instruction mentioned in the manual.